© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
Basic Installation/Operation
70421501 (EN)
26
G and K Models with RM Control Suffix
1. To use an Automatic Cycle, press a
TEMPERATURE pad. Select HIGH, MED,
LOW, DELICATE or NO HEAT for items that
should not be dried with heat. A light to the left
of the selected pad lights up.
To use a Time Dry or Custom Cycle, refer to the
Programming Manual.
Figure 16
2. Select REVERSING or NONREVERSING
cylinder rotation setting.
Figure 17
3. Press START pad to start tumble dryer.
Figure 18
NOTE: All pads can be pressed in any sequence
without damaging control or tumble dryer. To stop
the tumble dryer at any time, open the door or
press STOP.
Figure 19
NOTE: The window display will flash. Press STOP
twice (within 3 seconds) to end the cycle and reset
the control to idle status. To restart the tumble
dryer, CLOSE door and press START pad.
IMPORTANT: If the loading door or lint panel
door is opened during the cycle, the heating system
will shut off and the motor will stop. To restart the
cycle, both doors must be closed and the PUSH TO
START button must be pressed in.
4. When the cycle is complete, open door and
remove the laundry.
TMB2201N
TMB2206N
TMB2202N
TMB2203N
www.groupdynamics-laundry.com
