19
HOW TO DETECT
STEP
5
While in Discrimination Mode keep the coil paral-
lel to the ground moving it from left to right with
a stable speed. If it finds something it will
highlight the metal found and give off a certain
tone (refer to page 24).
STEP
4
Press the
“GG”
button to calibrate the metal
detector to the soil composition you are detect-
ing in. Then press
“ENTER”
to activate Ground
Grab Mode. Display will show “Grab ok” when
ground grab is completed. If “Grab ER” shows,
there may be a metal object underground, find
another clean area nearby to retry ground grab.
STEP
1
Power ON by pushing the
“POWER”
button.
STEP
2
Press the
“SETTINGS”
button to change the
Sensitivity and Volume (default is 8/4). Press
“ENTER”
to save the changes made.
STEP
3
Press the
“SETTINGS”
button. There will be
two options to choose from:
Use the
“<”
and
“>”
arrow keys to the Discrimina-
tion option and press the
“ENTER”
button to
select. While in Discrimination you can eliminate
metals you do not want to detect by using the
“^”
and
“ ”
arrow keys. Press
“ENTER”
to save.
OPTION 1:
Use the
“<”
and
“>”
arrow keys to the Notch
option and press the
“ENTER”
button to select.
While in Notch you can eliminate certain metals
by selecting either All Metal, Coin or Jewelry. Use
the
“<”
and
“>”
arrow keys to scroll to the option
you want. Press
“ENTER”
to save.
OPTION 2:
^
STEP
6
When a metal is detected press and hold the
“PP”
button. Sweep the coil over the target in an “X”
pattern. While in PinPoint it will show you the
depth of the metal found, so you can accurately
know how far down to dig. To deactivate
pinpoint mode, simply release the “PP” button.
STEP
7
Dig object out.
STEP
8
Once the object is found, fill the hole back up to
the way you found it.
