Toughsat
Flyaway Bracketing Manual
Ground Control
Step 10 – The dolly wheels will pop out when the mobile system is placed on the brackets. You will need to adjust
the case to align the four holes over the T-Nuts at the ends of the rails.
Lining up the holes takes some practice. Try finding one hole and placing a bolt in before lining up other holes.
Secure all the bolts with a ratchet wrench. Use the leveling posts to level the system on uneven ground.
The Flyaway Ground Bracketing is now installed. Please refer to the Flyaway Users Manual for instructions on
attaching the .98 Meter reflector, cables, electronics and other operation.
- 6 -
