MCD-VOYAGER User Manual
Ground Control
Monitoring Usage
The amount of Megabytes transferred is shown on the Usage Statistics screen of the Voyager Web
Interface. This screen is reached by entering 192.168.128.100 into any connected browser and
selecting “
Statistics” from the side menu.
The usage screen is divided into two parts, “Traffic statistics since powered on” are similar to the
trip counter on a vehicle, but this trip counter is reset each time the system is powered on. You
can also reset this counter at any time by selecting the “Reset” checkbox and pressing “Apply”.
The other part is the “Cumulative traffic statistics” which shows all Megabytes transferred over the
life of the terminal. This counter is much like a vehicle odometer and cannot be reset unless the
terminal is factory reset (and upgraded to the most recent firmware).
Note these totals are estimates and should only be used as a general idea of usage.
14
