Page 2
MAC ADDRESS
0001CE20001
-ADV-C-MLT-00000001
Load/Clear
Status
Reset
!
!
12V 5A MAX
RS-485
A B S
Optical
Tamper
Advance Single Tampo Printing 1v0
Battery
A Lithium Polymer
6,000mAh battery
to provide a battery
back-up service during
power outages.
Only the battery
supplied by Grosvenor
(Part No. ADV-BAT-S)
may be used.
See
Notes
on page 4.
Load/Clear
Used to reset
configuration data.
See
Notes
on page
4.
Reset
Use only when
requested by
Grosvenor Technical
Support.
Optical Tamper
No connection is
needed; the optical
tamper is operational
when the case is
closed.
RS485 Port
Used for host comms
when RS485 is used
to connect controllers.
See
Notes
on page 5.
Ethernet Port
For IP host comms and
required for configuration.
10/100 BASE-T
Full duplex, POE/POE+
Ethernet Port indicators are
shown below.
Status LED
The Controller Status
LED reports the
controller state.
See
Notes
on page 4.
Power In
12V DC 5A Max
For full details of
power options and
requirements, see
page 3.
USB Ports
Two USB 2.0 Type A ports;
intended for Grosvenor -
approved products only.
Can be used to update
controller firmware. See
Notes
on page 5.
Blade Connection
The 485 Line Controller cannot
be used with any blades. Blades
connected will not function.
Flashes for
Ethernet activity
No Activity
Amber
Off
100 Mbps
No Link
Green
Off
Connections
