www.gronomics.com
East Bethel, MN USA
763-753-7374
3
End Rail And Center Support Rail Assembly
2
Side Rail Assembly
NOTE: Garden bed will be assembled upside down and
fl
ipped over
when completed.
Stand two 4” x 4” x 19” corner posts (Item 1) and one 4” x 4” x 19” center
post (Item 2) between the corner posts with slots facing each post and
slots facing away from you.
Install two 45” x 5-1/2” side rails w/Logo (Item 4), (position side rails w/
Logo upside down) into the slots and slide to the bottom of the slots.
Repeat procedure for the remaining two 4” x 4” x 19” corner posts and
the 4” x 4” x 19” center post, using 45” x 5-1/2” side rails (Item 3).
Install the three 31” x 5-1/2” side rails (Item 5) into the slots and slide to
the bottom of the slots.
1
Position Logo Upside Down
2
4
1
4
5
5
5
5
Garden Bed Completed
4
Final Side Rail Assembly
Install the eight remaining 45” x 5-1/2” side rails (Item 3) into the slots
and slide down.
Install the four remaining 31” x 5-1/2” side rails (Item 5) into the slots and
slide down.
Flip the garden bed right side up. (See step 5).
Garden bed shown in
fi
nished position.
When
fi
lling with soil, raise the center support rail (Item 5)
to the middle of the slots (as shown).
NOTE: Ground preparation is optional. It is recommended to level an
area under the frame of the garden bed before placing garden bed and
fi
lling with soil.
Soil Capacity: 28.1 Cubic Feet
5
5
3
3
Logo
Logo
6
