16
DECLARATION OF CONFORMITY:
We, hereby, declare on our sole responsibility, that products described in these operating instructions
and marked with a catalogue number and a type, and which technical data can be found in point
“Technical Data”, comply with the requirements of the following directives: 2004/108/UE, 2006/95/UE,
2006/42/UE, 2011/65/UE and the following harmonized standards:
PN-EN 62841-1
PN-EN 60745-2-3
PN-EN 614-1+A1
PN-EN 953+A1
PN-EN ISO 12100
PN-EN 61310-3
PN-EN 1037+A1
PN-EN 61000-6-1
PN-EN 61000-6-3
Intended Use
The angle grinder is intended for grinding, sanding, wire brushing and abrasive cutting-off of metal,
concrete, stone and similar materials without using water. In the case of working with stone, additional
appropriate dust extracting tool must be used.
DEFINITIONS OF SYMBOLS USED IN THE OPERATING INSTRUCTIONS
Read the operating instructions
before use!
Wear eye protection!
Wear face shield!
Wear dust mask!
Wear ear protection!
Follow the instructions marked
in the text with this symbol!
Store separately and dispose
of in compliance with environ-
ment protection standards!
Original Operating Instruction
Szlifierki_katowe_Full_v04_HR.indd 16
Szlifierki_katowe_Full_v04_HR.indd 16
2016-10-26 00:19:28
2016-10-26 00:19:28
