Grohe Avensys Скачать руководство пользователя страница 8

Страница: 8 / 12

Installation

Pipe Connection

1.Close free outlet with plug (K), see Fig. [9].

2.Thread the outlet nipple (L) with the O-ring

seal into the mixer body outlet.

3.Insert pipe and tighten outlet nipple (L).

Please refer to chapter "Maximum Hot
Water Limit Setting" on page 10 for limiting
maximum outlet temperature.

Open hot and cold water supply.

Check the pipework and connections to the
single lever mixer for leaks.

The single lever mixer is now ready for use.

Shower Hose Connection

1.Close free outlet with plug (K), see

Fig. [10].

2.Remove O-ring seal (L1).

3.Turn outlet nipple (L) 180

and fit O-ring

seal (L1).

4.Thread the outlet nipple with the O-ring

seal into the mixer body outlet.

5.Connect flexible shower hose.

Please refer to chapter "Maximum Hot
Water Limit Setting" on page 10 for limiting
maximum outlet temperature.

Open hot and cold water supply.

Check the pipework and connections to the
single lever mixer for leaks.

The single lever mixer is now ready for use.

24m

180

955751.book : i95575gb.fm Seite 9 Mittwoch, September 20, 2000 10:10 AM

Содержание Avensys













Результаты поиска

Содержание Avensys

Отзывы:

Бренды по названию

Популярные бренды

Grohe Avensys, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Avensys

Отзывы:

Бренды по названию

Популярные бренды