Groen EE Domestic Скачать руководство пользователя страница 1

Страница: 1 / 12

OPERATOR MANUAL

IMPORTANT INFORMATION, KEEP FOR OPERATOR

THIS MANUAL MUST BE RETAINED FOR FUTURE REFERENCE. READ,
UNDERSTAND AND FOLLOW THE INSTRUCTIONS AND WARNINGS
CONTAINED IN THIS MANUAL.

FOR YOUR SAFETY

Instructions to be followed in the event user smells

gas. This information shall be obtained by consulting your local gas
supplier. As a minimum, turn off the gas and call your gas company and
your authorized service agent. Evacuate all personnel from the area.

WARNING

Improper installation, adjustment, alteration, service or

maintenance can cause property damage, injury or death. Read the
installation, operating and maintenance instructions thoroughly before
installing or servicing this equipment.

NOTIFY CARRIER OF DAMAGE AT ONCE

It is the responsibility of the

consignee to inspect the container upon receipt of same and to determine
the possibility of any damage, including concealed damage. Unified
Brands suggests that if you are suspicious of damage to make a notation
on the delivery receipt. It will be the responsibility of the consignee to file
a claim with the carrier. We recommend that you do so at once.

Manufacture Service/Questions 888-994-7636.

PART NUMBER 147399, REV. G (02/21)

This manual provides information for:

STEAM JACKETED KETTLE

MODELS EE DOMESTIC

EQUIPMENT DESCRIPTION

Groen Model EE are floor-mounted, tilting, steam-jacketed kettles which have
thermostatically controlled, self-contained, electrically-heated steam supplies
and appropriate controls, mounted on a sturdy base. Heat produced by electric
heating elements boils water in a reservoir below the jacket to produce steam
under pressure.
The kettle is surrounded by air-insulated stainless steel sheathing. Stainless
steel panels enclose all of the controls.  Three stainless steel, tubular legs
support the unit.
EE kettles are available in 20, 40, 60, 80 and 100 gallon capacities. Kettle bodies
are welded into one piece. Models are all equipped with a sanitary tangent
draw-off (product faucet) valve and a stainless steel strainer. This standard
draw-off is two inches in diameter, and uses a compression disc valve. The unit
is controlled with a thermostat, which turns electric power on or off, and sets
the cooking temperature.
Instruments are provided to show what is happening inside the unit:
•  Water gauge glass: shows the level of water within the steam jacket
•  Pressure/vacuum gauge: shows the steam pressure and if there is air in the

jacket

• Indicator lamp: Lights when the kettle is being heated

Automatic controls within the unit:
• Contactor: Controlled by the thermostat, turns heating element power on or off
• Low-water cutoff: Turns off power to keep heating elements from overheating

if water loss exposes them above the water level.

•  Safety valve: Releases steam if jacket pressure gets too high
The jacket is filled at the factory with water that contains rust inhibitors. When
air is removed from the jacket, the kettle efficiently provides a uniform heating
temperature range of 150oF to approximately 270oF (65 to 132oC). This range
allows the kettle to be used for warming, simmering, boiling or braising.
The interior of the kettle is polished to a 180 emery grit finish and the exterior is
given a uniform Number 4 finish. The unit is ASME shop inspected and registered
with the National Board for working pressures up to 30 PSI.
Optional equipment for the EE and AE kettles includes:
•  Three inch draw-off valve
•  1/4” perforated or solid disc strainer
•  Basket inserts (TRI-BC)

REFERENCES

KLENZADE SALES CENTER ECOLAB, Inc.
370 Wabasha
St. Paul, Minnesota 55102
800/352-5326 or 612/293-2233

NFPA/70 The National Electrical Code

NATIONAL FIRE PROTECTION ASSOCIATION
60 Battery March Park
Quincy, Massachusetts 02269

ECONOMICS LABORATORY, INC.
St. Paul, Minnesota 55102

888-994-7636, fax 888-864-7636

unifiedbrands.net

NSF INTERNATIONAL
798 N. Dixboro Rd.
P.O. Box 130140
Ann Arbor, Michigan 48113-0140

UNDERWRITERS LABORATORIES, INC.
333 Pfingsten Road
Northbrook, Illinois 60062

ZEP MANUFACTURING CO.
1310-T Seaboard Industrial Blvd.
Atlanta, Georgia 30318

The information in this document is Confidential and shall not be disclosed to any third party without the express written

consent of Unified Brands. Information contained in this document is known to be current and accurate at the time of printing/