manualshive.com logo in svg

Grizzly WOOD MILL G9959, Инструкция по эксплуатации

Поделиться
Скачать
Grizzly WOOD MILL G9959 Скачать руководство пользователя страница 10

-8- 

G9959/G9977 Wood Mill

Lifting Wood Mill

The model G9959/G9977 Wood Mill requires the
use of lifting equipment such as a fork lift, engine
hoist or boom crane. 

Do Not

lift the machine by

hand. See warning at right. Used in conjunction
with lifting straps and following safe lifting proce-
dures as detailed by the manufactures of these
lifting devices, the Wood Mill can be safely lifted
off the pallet and placed in the desired location.

Do Not

lift machine from any other point than that

pictured in 

Figure 3.

The model G9959/G9977
is a heavy machine,
1,350 lbs. shipping
weight. DO NOT over-
exert yourself while
unpacking or moving
your machine – you will
need assistance and
power equipment.
Serious personal injury
may occur if safe moving
methods are not fol-
lowed. 

If moving this machine
up or down stairs, the
machine must be dis-
mantled and moved in
small pieces. Also, make
sure floor and stair
structures are capable of
supporting the com-
bined weight of the
machine parts and the
people moving them.

Figure 3.

Use only this lifting point.

Содержание WOOD MILL G9959





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды