Grizzly T33300, Руководство пользователя

Страница: 20 / 36

Wear gloves to protect your hands while
handling and installing the blade.
Figure 7. Loosening arbor bolt.
Figure 8. Removed saw blade and blade-
fastening components.
Figure 9. Location of riving knife port hole.
-18-
Model T33300 (Mfd. Since 04/22)
3. Loosen arbor bolt (see Figure 7).
The riving knife must be properly aligned with the
blade and positioned a suitable distance away
from the blade to function effectively.
Always keep the saw upright, and position the
saw along the edge of a workbench or table so
that the blade and riving knife can be lowered
safely down below the surface edge.
Tools Needed Qty
Hex Wrench 5mm .............................................. 1
Straightedge 12" ................................................ 1
To adjust riving knife:
1. Engage plunge release and lower blade until
riving knife lock is accessible through port
hole (see
Figure 9).
Riving Knife
Port Hole
Arbor Bolt
4. Carefully remove arbor bolt and outer flange,
then guide blade down and out of saw (see
Figure 8).
5. Insert new blade in saw, aligning center of
blade over inner flange (see Figure 8).
6. Verify grooves of outer flange are correctly
lined up with inner flange (see
Figure 8).
7. Engage blade lock to keep arbor flange
steady, then firmly tighten arbor bolt.
Blade
Inner
Flange
Arbor Bolt
Outer Flange
Riving Knife
Adjustment