Grizzly T32720, Руководство пользователя

Страница: 25 / 40

Model T32720 (Mfd. Since 06/21)
-23-
The tool rest can be attached in two positions,
allowing for grinding with or against the rotation
direction of the grinding wheel.
Working with the grinding wheel rotation yields
more precise results and removes less material.
Use this method for finer tools, such as knives or
carving tools.
Working against the grinding wheel rotation
removes large amounts of material quickly but
does not yield precise results. Use this method for
coarse tools such as axes.
Grinding Against Wheel Rotation
1. DISCONNECT MACHINE FROM POWER!
2. Position machine so ON/OFF switch faces
towards you.
3. Install tool rest in vertical mounts shown in
Figure 22. Be sure rest is secure and will not
move while grinding.
Figure 22. Tool rest installed in vertical mounts.
Figure 23. Example of properly grinding against
wheel rotation.
Grinding With Wheel Rotation
1. DISCONNECT MACHINE FROM POWER!
2. Position machine so ON/OFF switch faces
away from you.
3. Install tool rest in horizontal mounts shown in
Figure 24. Be sure rest is secure and will not
move while grinding.
4. Connect machine to power.
5. Rest workpiece against tool rest with sharp-
ened edge pointing away from you (see
Figure 23).
6. Perform grinding operation on grinding area
indicated in Figure 23.
Tool Rest
Vertical Mount
(1 of 2)
Figure 24. Tool rest installed in horizontal
mounts.
Horizontal Mounts
Tool Rest
Grinding Wheel
Rotation
4. Connect machine to power.
— If wheel appears to wobble excessive-
ly, sharpener vibrates excessively, or
any other unsafe condition appears with
new wheel, stop sharpener and refer to
Troubleshooting on Page 29.