-6-
Model T32537 (Mfd. Since 01/21)
SECTION 2: SETUP
This machine was carefully packaged for safe
transport. When unpacking, separate all enclosed
items from packaging materials and inspect them
for shipping damage.
If items are damaged,
please call us immediately at (570) 546-9663.
IMPORTANT: Save all packaging materials until
you are completely satisfied with the machine and
have resolved any issues between Grizzly or the
shipping agent. You MUST have the original pack-
aging to file a freight claim. It is also extremely
helpful if you need to return your machine later.
Unpacking
The following items are needed, but not included,
for the setup/assembly of this machine.
Description Qty
•
Hex Wrenches 3, 4mm ..........................1 Ea
•
Square 12" .................................................. 1
•
Level 36" ..................................................... 1
•
Phillips Head Screwdriver #2 ..................... 1
•
Tape Measure............................................. 1
•
Work Surface (Min. 7' x 4') ......................... 1
•
Scrap Wood ................................ As Needed
Needed for Setup
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Wear safety glasses during
the entire setup process!
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Inventory (Figure 1)
Qty
A.
Router Mounting Plate
............................... 1
B.
Cross V-Rails (48") ..................................... 2
C.
Main V-Rails (72") ...................................... 2
D.
Gussets (Left) ............................................. 2
E. Gussets (Right) ........................................... 2
F.
Router Plate Hangers
................................. 2
G. V-Rail Mounting End Caps ......................... 4
H. V-Rail End Caps
......................................... 4
I.
Guide Block End Caps
............................... 6
J. Long Guide Blocks ..................................... 2
K.
Short Guide Blocks .................................... 2
Figure 1. T32537 inventory.
A
D
F
E
G
H
I
J
K
B
C
