Grizzly T31739 Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 44

Grizzly T31739 Скачать руководство пользователя страница 30

-28-

Model T31739 (Mfd. Since 11/19)

SECTION 6: MAINTENANCE

Schedule

To reduce risk of shock or

accidental startup, always

disconnect machine from

power before adjustments,

maintenance, or service.

For optimum performance from this machine, this
maintenance schedule must be strictly followed.

Ongoing
To minimize your risk of injury and maintain proper
machine operation, shut down the machine imme-
diately if you ever observe any of the items below,
and fix the problem before continuing operations:

•

Loose mounting bolts.

•

Worn switches.

•

Worn or damaged wires.

•

Damaged V-belt.

•

Any other unsafe condition.

Monthly Check
•

V-belt tension, damage, or wear (

Page 32).

•

Clean/vacuum dust buildup off motor.

Cleaning the Model T31739 is relatively easy.
Vacuum excess wood chips and sawdust, and
wipe off the remaining dust with a dry cloth. If any
resin has built up, use a resin dissolving cleaner
to remove it.

Protect  the  unpainted  cast-iron  table  by  wiping
it  clean  after  every  use—this  ensures  moisture
from  wood  dust  does  not  remain  on  bare  metal
surfaces.  Keep  the  table  rust-free  with  regular
applications of products like those in

Figure 39.

Cleaning &

Protecting

Lubrication

An essential part of lubrication is cleaning the
components before lubricating them.

This step is critical because grime and chips build
up on lubricated components, which makes them
hard to move. Simply adding more lubricant will
not result in smooth moving parts.

Clean components in this section before lubricat-
ing with recommended products like those shown
in

Figure 40.

DISCONNECT MACHINE FROM POWER
BEFORE PERFORMING LUBRICATION.

Figure 39. Recommended products for

protecting unpainted cast-iron and steel.

G5562—SLIPIT® 1 Qt. Gel

G5563—SLIPIT® 12 Oz. Spray

G2871—Boeshield® T-9 12 Oz. Spray

H3788—G96® Gun Treatment 12 Oz. Spray

T23962—ISO 68 Moly-D Way Oil, 5 Gal.
T26419—Syn-O-Gen Synthetic Grease

Figure 40. Recommended lubrication products.

T23962

T26419

«
...
28
29
30
31
32
...
»

Содержание T31739













































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды