Grizzly T31681, Руководство пользователя

Страница: 18 / 36

If you are not experienced with this type
of machine, WE STRONGLY RECOMMEND
that you seek additional training outside of
this manual. Read books/magazines or get
formal training before beginning any proj-
ects. Regardless of the content in this sec-
tion, Grizzly Industrial will not be held liable
for accidents caused by lack of training.
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
To reduce risk of eye or face
injury from flying debris,
always wear safety glasses
and face shield when oper-
ating this machine.
ONLY use food-grade saw blades (typically
stainless steel) to prevent food contamina-
tion from metal corrosion.
Saw blades are very sharp
and can quickly cause cut-
ting injuries. Always wear
heavy-leather gloves when
handling saw blades.
-16-
Model T31681 (Mfd. Since 12/19)
SECTION 4: OPERATIONS
Changing Blade
The saw blade included with the Model T31681 is
a general purpose 4 TPI (Teeth Per Inch) blade.
Under normal conditions, the saw blade should be
replaced after sawing 4400 lbs. of meat or bone.
Refer to
ACCESSORIES on Page 23 for replace-
ment blades. Do research to help select the
proper blade for the application.
To change saw blade:
1. DISCONNECT MACHINE FROM POWER!
2. Open wheel cover to expose wheels.
3. Rotate tension knob counterclockwise to
decrease blade tension until blade moves
freely.
4. Remove blade from machine.
5. Install replacement blade over upper and
lower wheels until it is flush against wheel
back lip (see
Figures 12 & 13 on Page 17).
Hold in place for now.