Grizzly T31566, Инструкция по эксплуатации

Страница: 3 / 12

T31566 Mobile Base (Mfd. Since 08/19)
-3-
3. Attach foot pedal to each front corner bracket
using (1) M8-1.25 x 50 shoulder bolt and (1)
M8-1.25 lock nut (see
Figure 6).
Assembling Mobile Base
Figure 6. Attaching foot pedals.
Foot
Pedal
1. Attach swivel caster to each corner bracket
with (4) M8-1.25 x 16 hex bolts and (4)
M8-1.25 lock nuts (see
Figure 4).
Figure 4. Swivel caster attached to bracket.
Swivel
Caster
2. Install foot pedal plunger and spring into each
corner bracket (see Figure 5), and attach a
rubber foot (with M10-1.5 hex nut) to the bot-
tom of each foot pedal plunger.
Figure 5. Installing foot pedal plunger and
spring.
Foot Pedal
Plunger
Spring
Rubber
Foot
Corner
Bracket
4. Measure machine base footprint size.
5. Arrange corner brackets in desired orienta-
tion. Choose orientation to ensure safe clear-
ance around base of machine, as well as
desired placement within shop.
6. Slide corner brackets over ends of side rails
(see
Figure 7). Position corner brackets so
inside opening is
1
⁄
4
"–
1
⁄
2
" larger than both
width and length of machine base footprint.
Front
Figure 7. Example of assembled mobile base
with inside opening slightly larger than machine
base to ensure easy fit.
Inside
Opening
Left Corner
Bracket
Right Corner
Bracket