Grizzly T27665, Инструкция по эксплуатации, Страница: 3 / 8

T27665 (Mfd. 01/16)
-3-
Mounting
Because of the dynamic forces involved in oper-
ating the arbor press, we strongly recommend
mounting it to a benchtop or other stable working
surface to prevent it from moving during operation
and causing accidental injury or damage.
The base of the arbor press has two
3
⁄
4
" mounting
holes on each side of the upright (see Figure 3).
Figure 5. Example of a "Direct Mount" setup.
Machine Base
Workbench
Lag Screw
Flat Washer
Another option is a "Direct Mount" (see example
below) where the machine is secured directly to
the workbench with lag screws and washers.
Figure 3. Location of mounting holes in base.
3
⁄
4
" Mounting Hole
(1 of 2)
The strongest mounting option is a "Through
Mount" (see example below) where holes are
drilled all the way through the workbench—and
hex bolts, washers, and hex nuts are used to
secure the machine in place.
Figure 4. Example of a "Through Mount" setup.
Machine Base
Workbench
Hex
Bolt
Flat Washer
Flat Washer
Lock Washer
Hex Nut