T25953 T-Slot Table (Mfd. Since 10/17)
-3-
6. Place clean piece of cardboard on ground,
then lay T-slot table face down on cardboard.
7. Place stand assembly on table, align mount-
ing holes, and attach with (10) M4 x 20 wood
screws (see
Figure 8).
Figure 7. Feet attached to stand assembly.
8. With help of an assistant, turn work table right
side up. Position table so it is centered over
stand (not leaning to one side or the other).
9. Final tighten all fasteners from Steps 1–4.
10. Loosen (4) M10-1.5 hex nuts on stand feet,
adjust feet to make sure table does not wob-
ble, then tighten hex nuts to secure feet.
Figure 8. T-slot table installed.
5. Remove (1) hex nut from top of each foot
stud, insert stud through hole in bottom of
each leg, then re-install each hex nut to
secure feet (see
Figure 7). Bottom (2) hex
nuts should be positioned at same location
on all four studs.
x 10
NOTICE
Refer to our website or latest catalog for
additional recommended accessories.
•
Adjustable clamping force of 25-150 lbs.
(T28110) & 25-550 lbs. (T28111)
•
Versatile
5
⁄
16
" T-bolt fits standard
5
⁄
16
" T-tracks
•
Hardened steel push rod with non-marring
pad on In-Line Clamp
•
Lock knob secures clamp to T-track
• Patented mechanism
T-Track Clamps
Accessories
Figure 9. Grizzly T-track clamps.
T28110
T28111
Figure 10. D3347 Heavy-Duty Cam Clamp.
D3347–Heavy-Duty Cam Clamps for T-Tracks
Easy to set up and slides along on tracks. Fits
standard
5
⁄
16
" T-tracks.
Foot
