For questions or help with this product contact Tech Support at (570) 546-9663 or [email protected]
MODEL T25953
T-SLOT WORK TABLE
INSTRUCTIONS
For Models Mfd. Since 10/17
COPYRIGHT © JANUARY, 2018 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#BL19338 PRINTED IN CHINA
Introduction
V1.01.18
Description Qty
A. Legs ........................................................... 4
B. Feet M10-1.5 x 136 ..................................... 4
C. Long Braces 38" ......................................... 4
D. Hex Nuts M8-1.25 ..................................... 32
E. Flat Washers 8mm .................................. 32
F. Carriage Bolts M8-1.25 x 12 ..................... 32
G. Wood Screws M4 x 20 ............................ 10
H. Short Braces 26" ........................................ 4
I. T-Slot Table ................................................ 1
Inventory
Specifications
•
Top Dimensions ..............................28" x 40"
•
Footprint (Length x Width) .......... 38
1
⁄
2
" x 27"
•
T-Track Dimensions ..................
3
⁄
4
"W x
3
⁄
8
"D
•
Maximum Weight Capacity ..............700 lbs.
Needed for Setup
•
Open-End Wrench or Socket 14mm .......... 1
•
Phillips Head Screwdriver #2 ..................... 1
•
Assistant ..................................................... 1
Figure 2. T25953 Stand Components.
Figure 1. Model T25953 T-Slot Work Table.
H
Figure 3. T25953 T-Slot Table.
A
B
C
D
E
F
H
G
I
The Model T25953 T-Slot Work Table is designed
to support sanding, clamping, routing, assem-
bly, and sawing projects. Workpieces can be
clamped virtually anywhere on the T-slot table
using Grizzly's T-Track Auto Adjust Clamps and
Fence Kits (not included). The T-slots (see inset
for dimensions) are compatible with
5
⁄
16
" bolts.
7
/
16
"
3
/
16
"
5
/
16
"
3
/
8
"
