t23110/t23111/t23112 lever Chain hoist
-2
-
safety instructions for machinery
8. Wear proper apparel. do
not wear loose clothing, gloves,
neckties, rings, or jewelry which may
get caught in moving parts. Wear pro-
tective hair covering to contain long
hair and wear non-slip footwear.
9. never operate machinery
When tired, or under the
influence of drugs or
alcohol. Be mentally alert at all
times when running machinery.
10. only alloW trained and
properly
supervised
personnel to operate machinery.
Make sure operation instructions are
safe and clearly understood.
11. never leave When machine is
running. turn power off and allow
all moving parts to come to a com-
plete stop before leaving machine
unattended.
12. do not use in dangerous
environments. do Not use
machinery in damp, wet locations,
or where any flammable or noxious
fumes may exist.
13. Keep WorK area clean and
Well lit. Clutter and dark shadows
may cause accidents.
14. use a grounded eXtension
cord rated for the machine
amperage. undersized cords over-
heat and lose power. replace exten-
sion cords if they become damaged.
do Not use extension cords for
220V machinery.
15. alWays disconnect from
poWer
source
before
servicing machinery. Make
sure switch is in oFF position before
reconnecting.
16. maintain machinery With
care. Keep blades sharp and clean
for best and safest performance.
Follow instructions for lubricating and
changing accessories.
17. remove adJusting Keys and
Wrenches. Make a habit of check-
ing for keys and adjusting wrenches
before turning machinery oN.
18. checK for damaged parts
before using machinery.
Check for binding and alignment of
parts, broken parts, part mounting,
loose bolts, and any other conditions
that may affect machine operation.
repair or replace damaged parts.
19. do not force machinery. Work
at the speed for which the machine or
accessory was designed.
20. secure WorKpiece. use clamps
or a vise to hold the workpiece when
practical. a secured workpiece pro-
tects your hands and frees both
hands to operate the machine.
21. do not overreach. Keep proper
footing and balance at all times.
22. many machines Will eJect
the WorKpiece toWard the
operator. Know and avoid con-
ditions that cause the workpiece to
"kickback."
23. allergic reactions. Be aware
that certain woods may cause an
allergic reaction in people and ani-
mals, especially when exposed to fine
dust. Make sure you know what type
of wood dust you will be exposed to
and always wear an approved respi-
rator.
