Grizzly T1238, Инструкция по эксплуатации

Страница: 4 / 8

-4-
T1238 Tool Table (Mfd. Since 10/17)
18. Ensure all fasteners are firmly tightened and
wheel mechanism operates smoothly.
13. Turn table assembly unit upright. Attach bot-
tom of a side panel to table assembly shelf
with (2) M8-1.25 x 12 carriage bolts and
(2) M8-1.25 flange nuts (see
Figure 11).
16. Attach tool holder and top of side panel
with (2) M8-1.25 x 12 carriage bolts and
(2) M8-1.25 flange nuts (see
Figure 13).
Figure 14. Table top attached.
x 4
17. Attach table top with (4) M8-1.25 x 25 flat
head screws and (4) M8-1.25 flange nuts
(see
Figure 14).
Figure 13. Tool holder attached.
x 2
Tool
Holder
Note:
Position side panel so end with
long tab faces up.
15. Repeat Step 13 to attach second side panel
to opposite side of table assembly (see
Figure 11).
14. Attach handle and top of side panel
with (4) M8-1.25 x 12 carriage bolts and
(4) M8-1.25 flange nuts (see
Figure 12).
Figure 11. Bottom of side panel attached.
Long Tab
Short Tab
Side
Panel
Shelf
Figure 12. Top of side panel and handle
attached.
x 4
Handle
Side
Panel
x 2
Note:
The handle goes on the same side
as the pedal assembly.