Grizzly T1238, Инструкция по эксплуатации

Страница: 2 / 8

-2-
T1238 Tool Table (Mfd. Since 10/17)
Assembly
This tool table must be fully assembled before it
can be used. Before beginning the assembly pro-
cess, refer to
Needed for Assembly and gather
all listed items.
2. Attach wheel assembly to side assembly
A with (4) M8-1.25 x 16 button head cap
screws. Long linkage should point outward
(see
Figure 4) with wheels in the down
position.
To assemble tool table:
1. Build side assembly A by attach-
ing (1) front upper brace to (2) legs with
(4) M8-1.25 x 12 carriage bolts and
(4) M8-1.25 flange nuts (see
Figure 3). Use
90° square to make sure legs and supports
are perpendicular (see
Figure 3).
Figure 4. Wheel assembly orientation.
4. Attach pedal assembly to side assembly B
built in Step 3 with (4) M8-1.25 x 16 button
head cap screws. Ensure pedal points out-
ward (see
Figure 5).
3. Repeat Step 1 in a similar manner to build
side assembly B.
Figure 5. Pedal assembly orientation.
5. Attach caster to pedal assembly with (1)
M8-1.25 x 70 hex bolt and (1) M8-1.25 lock
nut (see
Figure 6).
Figure 3. Side assembly A built.
x 4
Legs
90
Degree
Square
x 4
Pedal
Pointing
Outward
x 4
Linkage
Pointing
Outward
Wheel
Down
Upper
Brace
Figure 6. Caster wheel attached to pedal
assembly.
x 1
Pedal
Assembly
Caster