background image

model t10432 (mfg. since 11/10)

-7-

Wear safety glasses dur-

ing the entire setup pro-

cess!

This  router  table  pres-

ents  serious  injury  haz-

ards  to  untrained  users. 

Read  through  this  entire 

manual to become famil-

iar with the controls and 

operations  before  using 

this router table!

SEcTiON 2: SETUp

the  following  are  needed  to  complete  the  setup 
process,  but  are  not  included  with  your  router 
table.

Description 

Qty

• 

another person .......................................... 1

• 

Wrench or socket 10mm ............................ 1

• 

Wrench or socket 13mm ............................ 1

Needed for Setup

your router table was carefully packaged for safe 
transportation.  remove  the  packaging  materials 
from  around  your  router  table  and  inspect  the 
contents. if you discover the router table is dam-
aged, 

please  immediately  call  Customer  Service 

at (570) 546-9663

 

for advice. 

save the containers and all packing materials for 
possible  inspection  by  the  carrier  or  its  agent. 

Otherwise, filing a freight claim can be difficult.

When you are completely satisfied with the condi-
tion of your shipment, inventory the contents.

Unpacking

SUFFOCATION HAZARD!

Keep  children  and  pets  away 

from  plastic  bags  or  packing 

materials  unpacked  with  this 

machine. Discard immediately.

Содержание T10432





























Отзывы: