-14-
Model t10222 (Mfg. since 12/09)
SECTiON 3: OpERATiONS
Damage to your eyes and lungs could result
from using this tool without proper protec
-
tive gear. Always wear safety glasses and a
respirator when using this tool.
NOTICE
If you have never used this type of tool or
equipment before, WE STRONgLy RECOM
-
MEND
that you read books, review industry
trade magazines, or get formal training
before beginning any projects. Regardless of
the content in this section, grizzly industrial
will not be held liable for accidents caused
by lack of training.
Loose hair, clothing, or
jewelry could get caught
in machinery and cause
serious personal injury.
Keep these items away
from moving parts at all
times to reduce this risk.
To reduce the risk of
serious
injury
when
using this tool, read and
understand this entire
manual before beginning
any operations.
Operation Overview
the purpose of this overview is to provide the
novice operator with a basic understanding of how
the tool is used during operation, so the tool con-
trols/components discussed later in this manual
are easier to understand.
due to the generic nature of this overview, it
is not intended to be an instructional guide. to
learn more about specific operations, read this
entire manual and seek additional training from
experienced router operators, and do additional
research outside of this manual by reading "how-
to" books, trade magazines, or web sites.
To complete a typical operation, the
operator does the following:
1. Examines the workpiece to make sure it is
suitable for cutting.
2. Adjusts the fence boards close to the bit
for maximum workpiece support, and then
secures the fence boards in place.
3. Adjusts the bit height for the desired cutting
profile.
4. Adjusts the fence position to establish the
depth of cut.
5. Wears safety glasses and a respirator, and
locates push sticks if needed.
6. if using a reversible router, verifies that the
direction of spindle rotation is correct, and
then starts the router.
For smaller workpieces or odd-shaped
workpieces, a zero-clearance fence or jig is
used.
