Grizzly H8178, Руководство пользователя

Страница: 16 / 28

-14-
Model H8178 Power Feed
Operation Safety
SECTION 4: OPERATIONS
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving
machinery.
If you have never used this type of machine
or equipment before, WE STRONGLY REC-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
Figure 18.
Power feed controls.
Power Feed Controls
Refer to the list below and see
Figure 18
to
understand the power feed controls.
A. Green Power Lamp : When lit, it indicates
that the power feed has power.
B. Orange Fault Lamp
: When lit, it indicates
that you must reset the power feed because
the circuit board has either detected a motor
overload, or you have changed feed direc-
tion. Turn the feed speed dial to zero and
move the feed direction lever to center. The
lamp will then go out and the power feed is
ready to use again.
C. Feed Direction Lever : Move the lever left or
right from the center position to select table
travel direction.
D. Feed Speed Dial : Slowly rotate this dial to
select a feed speed and begin a feed opera-
tion. When finished with an operation, turn
the feed speed dial to zero, and move the
feed lever to the center position.
E. Rapid Feed Button : Push and hold the rapid
feed button to quickly move the table in the
selected direction.
F. Fuse : Protects circuits from power surge.
C D
B A
F
E
Always disconnect power
from the power feed when
not in use. Failure to do
this may result in power
feed damage.
NOTICE