Grizzly H8172, Руководство пользователя

Страница: 17 / 28

H8172 Cement Mixer -15-
Follow the tips below when using the cement
mixer:
• Before using your cement mixer, coat the
inside of the mixing drum with a light layer
of oil. Refer to
Lubrication on page 17 for
more details.
• Spray the inside surface of the cement mixer
with a small amount of water before adding
cement (in addition to the lubrication steps
above). This will make it easier to clean after
operation. Avoid spraying water on the switch
or motor cover!
• The mixer works more effectively and quickly
when batches are half the maximum recom-
mended mixture load, or if mixture materials
are added slowly (while mixing), rather than
all at one time.
• The maximum recommended mixture load is
3.2 cubic feet. This equates to:
— Six 60 lb. bags
— Four 90 lb. bags
Operation Tips
SECTION 4: OPERATIONS
Operation Safety
Do not put hands, shovels, or other tools
into the mixing drum while it is turning, or
injury or equipment damage may occur.
Children can hurt themselves if playing on
this mixer. If this machine is not stored in
a locked facility, always disconnect power
when leaving it unattended.
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
Eye injuries, respiratory problems, or hear-
ing loss can occur while operating this
tool. Wear personal protective equipment to
reduce your risk from these hazards.
If you are not experienced with this type
of machine, WE STRONGLY RECOMMEND
that you seek additional training outside of
this manual. Read books/magazines or get
formal training before beginning any proj-
ects. Regardless of the content in this sec-
tion, Grizzly Industrial will not be held liable
for accidents caused by lack of training.
Keep hair, clothing, and
jewelry away from mov-
ing parts at all times.
Entanglement can result
in death, amputation, or
severe crushing injuries!