h7583 tenoning Jig
-7-
Wear safety glasses dur-
ing the entire setup pro-
cess!
using the jig with the
table saw presents seri-
ous injury hazards to
untrained users. Read
through this entire man-
ual and the one for your
table saw to become
familiar with the controls
and operations before
starting the table saw!
SEcTION 2: SETup
the following are needed to complete the setup
process, but are not included with your machine:
Description
Qty
•
square 90° ................................................. 1
•
shop rags & solvent ................. As needed
•
Wrench 8mm .............................................. 1
•
Wrench 10mm ............................................ 1
•
Wrench 14mm ............................................ 1
•
Machinist's square ..................................... 1
Needed for Setup
your machine was carefully packaged for safe
transportation. remove the packaging materials
from around your machine and inspect it. if you
discover the machine is damaged,
please imme-
diately call Customer Service at (570) 546-9663
for advice.
save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi-
tion of your shipment, inventory the contents.
unpacking
