Grizzly H7509Z, Руководство пользователя

Страница: 7 / 16

Model H7509Z (Mfd. Since 01/21)
-7-
17. Attach outlet port and filter L-braces to blower
housing with outlet gasket between outlet
port and housing, as shown in
Figure 15,
using (8)
5
⁄
16
"-18 x 1" hex bolts, (16)
5
⁄
16
" flat
washers, and (8)
5
⁄
16
"-18 hex nuts.
Note: One brace attaches directly to hous-
ing with the following extra hardware:
(2)
5
⁄
16
"-18 x 1" hex bolts, (4)
5
⁄
16
" flat washers,
and (2)
5
⁄
16
"-18 hex nuts.
18. Mount filter to L-braces with brace gaskets
between them, as shown in
Figure 16, using
(4)
5
⁄
16
"-18 x
3
⁄
4
" hex bolts and
5
⁄
16
" fender
washers.
Figure 16. Mounting filter to braces.
Brace Gasket Here
Figure 15. Outlet port and filter L-braces
installed.
19. Apply 3 x 15mm foam tape rolls to lips of
outlet port, canister adapter, and both ends
of muffler, as shown in
Figure 17.
Figure 17. Foam tape applied to upper
components.
Foam
Tape
Foam
Tape
21. Apply 3 x 6 x 300mm foam tape to mating
surface of cyclone vacuum port.
Figure 18. Muffler properly positioned between
two gray flexible hoses.
Muffler
20. Attach 8" x 5" gray flexible hose between
canister adapter and muffler with (2) 8" hose
clamps, then attach 8" x 20" gray flexible
hose between muffler and outlet port with (2)
8" hose clamps (see
Figure 18).
Note: It may be necessary to reposition can-
ister L-braces down one bolt hole or shorten
length of longer piece of flexible hose to
accommodate bend in hose.
x 10
Outlet Port
L-Braces
x 4
Filter