Grizzly H7509Z, Руководство пользователя

Страница: 11 / 16

Model H7509Z (Mfd. Since 01/21)
-11-
41. Secure vacuum hose inside upper and lower
stand legs with (2) vacuum hose clips (see
Figure 32).
Figure 32. Securing vacuum hose to stand legs.
42. Remove securing Phillips head screw and
open power junction box on Model G0441
switch bracket (see
Figure 33).
43. Remove hex nuts, external tooth washers,
and Phillips head screw securing ground wire
to switch bracket (see
Figure 34).
44. Remove strain relief shown in Figure 34.
Figure 33. Location of securing screw on power
junction box.
Power
Junction Box
Figure 34. Inside power junction box (shown
with power conduit attached for clarity).
45. Remove (4) Phillips head screws, flat wash-
ers, and hex nuts shown in Figure 34 to
remove junction box from switch bracket.
x 4
Strain Relief
46. Install power junction box to left side of Model
H7509Z switch box base panel as it was
attached to G0441 switch bracket (see
Steps
43 – 45).
47. Close and secure power junction box.
48. Remove securing Phillips head screw and
washer and open magnetic switch box on
Model G0441 switch bracket (see
Figure 35).
Figure 35. Location of securing fasteners on
magnetic switch box.