Grizzly G9983, Руководство пользователя

Страница: 24 / 60

-22-
Model G9983 (Mfg. Since 8/09)
section 4: operations
eye injuries, respiratory problems, or hear-
ing loss can occur while operating this
tool. Wear personal protective equipment to
reduce your risk from these hazards.
operation overview
The purpose of this overview is to provide the nov-
ice machine operator with a basic understanding
of how the machine is used during operation, so
the machine controls/components discussed later
in this manual are easier to understand.
Due to the generic nature of this overview, it is
not intended to be an instructional guide. To learn
more about specific operations, read this entire
manual and seek additional training from expe-
rienced machine operators, and do additional
research outside of this manual by reading "how-
to" books, trade magazines, or websites.
to complete a typical operation, the operator
does the following:
1. examines the workpiece to make sure it is
suitable for sanding.
2. puts on the recommended personal protec-
tive equipment.
3. starts the dust collector.
4. Makes the thickness adjustment by placing
the workpiece on the conveyor table and
turns the conveyor handle until the workpiece
can be sanded and fed through smoothly.
5. turns on the main power supply, then the
sanding and conveyor motors.
6. slowly feeds the workpiece onto the con-
veyor belt, then releases the workpiece when
it is feeding through the sander.
7. stands to the side of the machine and
removes the workpiece from the sander as it
exits from the rear.
8. turns the sanding and conveyor motors
OFF.
to reduce your risk of
serious injury, read this
entire manual before
using machine.
if you are not experienced with this type
of machine, We strongly recommend
that you seek additional training outside of
this manual. read books/magazines or get
formal training before beginning any proj-
ects. regardless of the content in this sec-
tion, grizzly industrial will not be held liable
for accidents caused by lack of training.