Grizzly G9983, Руководство пользователя

Страница: 19 / 60

Model G9983 (Mfg. Since 8/09)
-17-
3. place a straightedge across both lower belt
rollers and rotate the adjustment knob until
the platen barely touches the straightedge.
the platen should now be set even with the
belt rollers.
figure 11. use this knob to raise/lower the
platen.
the platen must now be set even with the sanding
rollers.
to set the platen even with the belt rollers:
1. lower the conveyor table as far as it will go.
2. open the access door on the left-hand side
and locate the platen adjustment knob shown
in
figure 11.
figure 12. secure air hose with a hose clamp.
connecting air hose
the air hose connection is located at the regulator
on the front of the machine.
to connect the air hose:
1. Fit the hose over the regulator nozzle.
2. secure the hose with a hose clamp as shown
in
figure 12 and turn on your air compres-
sor.
3. regulate the air pressure to 75 psi. this is
the normal operating pressure for the Model
g9983.
do not exceed 75 lbs. of air pressure.
damage to the machine components may
result.
the main shut off valve should remain
closed until air pressure is needed. this
will reduce wear and tear on the air system
components.