Grizzly G8689, Руководство пользователя

Страница: 30 / 44

-28-
G8689 Mini Mill (Mfg. 8/06+)
Regular lubrication will ensure your mill performs
at its highest potential.
Place two to three drops of ISO 68 or SAE 20W
non-detergent oil or similar lubricant directly on
the following areas each time you use your mill
(see
Figures 31 & 32). An oil bottle has been
provided for this purpose.
A. On the Ways of the Cross Slide and Saddle
B. At the Column Pivot
C. Column Ways
Apply a light weight lithium based grease directly
to these points once a month or more frequently
as needed.
D. Longitudinal Leadscrew
E. Cross Feed Leadscrew
F. Column Gear Rack
Note: You will need to move the covers out of
the way to gain access to the A & E lubrication
points.
Lubrication
Figure 31. Points of lubrication.
B
A
D
E
C
F
Figure 32. Upper column lubrication points.
NOTICE
Lack of lubrication causes poor machine
performance. Keep your mill lubricated to
reduce wear on parts and discourage oxi-
dation..