manualshive.com logo in svg

Grizzly G7873, Руководство пользователя

Поделиться
Скачать
Grizzly G7873 Скачать руководство пользователя страница 9

-6-

Model G4181/G7873 (Mfd. Since 12/13)

The information contained herein is deemed accurate as of 6/4/2017 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 2 OF 2

Model G7873

Operation Info

Number of Feed Speeds.................................................................................................................................. 4

Feed Speeds........................................................................................................................ 13, 26, 33, 66 FPM

Swing.................................................................................................................................................... 360 deg.

Vertical Movement................................................................................................................................. 9-7/8 in.

Horizontal Movement........................................................................................................................... 18-1/8 in.

Rotation.................................................................................................................................. Forward, Reverse

Roller Info

Number of Rollers............................................................................................................................................. 3

Roller Width........................................................................................................................................... 2-1/4 in.

Roller Diameter...................................................................................................................................... 4-5/8 in.

Roller Suspension..................................................................................................................................... 3/4 in.

Maximum Height Rollers Parallel Table Surface......................................................................................... 7 in.

Centers Between Rollers............................................................................................................................. 5 in.

Construction Info

Roller....................................................................................................................................... Synthetic Rubber

Housing...................................................................................................................................... Cast Aluminum

Supports............................................................................................................................................... Cast Iron

Column....................................................................................................................................................... Steel

Paint Type/Finish.................................................................................................................................... Enamel

Other

Column Diameter................................................................................................................................... 2-1/4 in.

Other Specifications:

Country of Origin .............................................................................................................................................. Taiwan

Warranty ........................................................................................................................................................... 1 Year

Approximate Assembly & Setup Time ........................................................................................................ 45 Minutes

Serial Number Location .................................. Checked Sticker, On In-feed Portion Of Housing's Roller Cover Side 

ISO 9001 Factory .................................................................................................................................................. Yes

Certified by a Nationally Recognized Testing Laboratory (NRTL) ......................................................................... Yes

Features:

Rollers are Spring Tensioned

Heavy-Duty Gear Reduction with Hardened Gears

Universal Positioning with Handle Locks

Rack and Pinion Horizontal Movement

Содержание G7873






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды