manualshive.com logo in svg

Grizzly G7873, Руководство пользователя

Поделиться
Скачать
Grizzly G7873 Скачать руководство пользователя страница 6

Model G4181/G7873 (Mfd. Since 12/13)

-3-

Machine Data Sheet (G4181)

The information contained herein is deemed accurate as of 6/4/2017 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 1 OF 2

Model G4181

MACHINE DATA

SHEET

Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901

MODEL G4181 1 HP POWER FEEDER

Product Dimensions:

Weight.............................................................................................................................................................. 130 lbs.

Width (side-to-side) x Depth (front-to-back) x Height........................................................................... 44 x 16 x 30 in.

Footprint (Length x Width)........................................................................................................................... N/A x N/A 

Shipping Dimensions:

Carton #1

Type........................................................................................................................................... Cardboard Box

Content................................................................................................................................................. Machine

Weight...................................................................................................................................................... 60 lbs.

Length x Width x Height............................................................................................................. 21 x 12 x 22 in.

Must Ship Upright.......................................................................................................................................... No

Carton #2

Type........................................................................................................................................... Cardboard Box

Content...................................................................................................................................................... Stand

Weight...................................................................................................................................................... 81 lbs.

Length x Width x Height............................................................................................................. 30 x 13 x 12 in.

Must Ship Upright.......................................................................................................................................... No

Electrical:

Power Requirement........................................................................................................... 240V, Single-Phase, 60 Hz

Full-Load Current Rating....................................................................................................................................... 4.2A

Minimum Circuit Size.............................................................................................................................................. 15A

Connection Type....................................................................................................................................... Cord & Plug

Power Cord Included.............................................................................................................................................. Yes

Power Cord Length................................................................................................................................................. 9 ft.

Power Cord Gauge......................................................................................................................................... 16 AWG

Plug Included.......................................................................................................................................................... Yes

Included Plug Type................................................................................................................................................ 6-15

Switch Type................................................................................................... Forward/Reverse Switch with 2 Speeds

Motors:

Main

Type................................................................................................................. TEFC Capacitor-Start Induction

Horsepower................................................................................................................................................ 1 HP

Phase............................................................................................................................................ Single-Phase

Amps................................................................................................................................................... 4.2A/2.5A

Speed..................................................................................................................................... 3210 / 1700 RPM

Power Transfer ................................................................................................................................. Gear Drive

Bearings........................................................................................................ Sealed & Permanently Lubricated

Main Specifications:

Workpiece Capacities

Minimum Workpiece Length........................................................................................................................ 7 in.

Содержание G7873






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды