-28-
g1028z/g1029z dust Collector
SECTiON 7: MaiNTENaNCE
always disconnect power
to the machine before
performing maintenance.
failure to do this may
result in serious person-
al injury.
always empty the collection bags on a regular
basis. emptying the collection bags allows the
machine to operate at a much higher level of
efficiency.
always wear the appropriate respirator or dust
mask and safety glasses when emptying the col-
lection bags. small dust particles can escape the
bags during emptying, causing them to become
airborne and easily inhaled. this microscopic air-
borne dust is extremely unhealthy to breathe and
can cause serious health problems.
While the model g1028z/g1029z excels at col-
lecting the majority of wood dust produced by
your machines, it is not an air filter; therefore,
we
strongly recommend the supplemental aid of a
shop air filter such as the grizzly g5955 or g9956.
air filters are designed to collect the smaller dust
particles that a dust collector bags cannot trap.
bag Cleaning
since all bearings are shielded and permanently
lubricated, simply leave them alone until they
need to be replaced. do not lubricate them.
Lubrication
always wear a respira-
tor when emptying the
dust collection bags
on the dust collector.
Sawdust may cause
allergic reactions or
respiratory problems.
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Daily Check:
•
loose mounting bolts.
•
Worn switch.
•
Worn or damaged wires.
•
almost full collection bag.
•
any other unsafe condition.
Schedule
