Grizzly G0890, Руководство пользователя

Страница: 36 / 60

-34-
G0890/G0891 (Mfd. Since 06/19)
Feed Roller Bushings
Oil Type ................SB1365 or ISO-68 Equivalent
Oil Amount ...........................................2–3 Drops
Frequency ................ Every 8 Hours of Operation
The infeed and outfeed rollers rotate inside bush-
ing blocks on both ends of the rollers. Add 2–3
drops of ISO 68 machine oil to the center hole of
the four feed roller tension adjustment bolts on top
of the headstock, as shown in
Figure 33.
Headstock Height Chain & Sprockets
Grease Type ..........................NLGI#2 Equivalent
Frequency ............ Every 160 Hours of Operation
The headstock leadscrews are synchronized by
the headstock height chain and sprockets located
underneath the planer base (see
Figure 35). Use
shop rags and mineral spirits to clean away debris
and grime, then brush on a light coat of multi-
purpose grease to the chain and sprockets.
Figure 35. Example of headstock height chain
and sprockets (viewed from underneath the base).
Columns & Leadscrews
Oil Type ................SB1365 or ISO-68 Equivalent
Oil Amount ............................................Thin Coat
Grease Type ..........................NLGI#2 Equivalent
Frequency .............. Every 40 Hours of Operation
The headstock rides on the columns and is moved
by the rotation of the leadscrews inside the col-
umns. Loosen the dust sleeve (see
Figure 34) to
access the columns and leadscrews. Apply a thin
coat of ISO 68 machine oil to the outside surface
of the columns and brush on a light application of
multi-purpose grease to the leadscrew threads.
Move the headstock up and down to distribute the
lubricant.
Figure 34. Location of column and leadscrew.
Column
Leadscrew
Figure 33. Example of lubrication locations for
feed roller bushings.
Lubricate
Here