Grizzly G0886 Скачать руководство пользователя страница 77

Страница: 77 / 80

Model G0886 (Mfd. Since 01/19)

-75-

BUY PARTS ONLINE AT GRIZZLY.COM!

Scan QR code to visit our Parts Store.

G0886

grizzly.com

Specifications

MODEL G0886

12" x 14" AUTO METAL-CUTTING BANDSAW

WARNING!

Main Motor: 3 HP, 220V, 3-Phase

Feed Motor: 0.3 HP, 220V, 3-Phase

Hydraulic Motor: 1 HP, 220V, 3-Phase

Coolant Motor: 1/8 HP, 220V, 3-Phase

Full-Load Current: 13.32A

Blade Speeds: 92, 161, 236 338 FPM

Blade Length: 155-1/2"

Max. Round at 90°: 11-13/16"

Max. Rect. at 90°: 11-13/16"H x 14"W

Weight: 1630 lbs.

Mfd. for Grizzly in Taiwan

Date

S/N

To reduce risk of serious personal injury when using this machine:

1. Read and understand owner’s manual before operating.

2. Never touch moving blade—keep hands out of blade path.

3. Always wear approved eye protection and a respirator.

4. Properly ground machine—connect to permanently grounded metal wiring

system or an equipment-grounding conductor.

5. Ensure machine is correctly set up before starting.

6. Only remove jammed cutoff pieces when blade is stopped.

7. Disconnect all power to machine before changing blades, servicing, or doing

maintenance.

8. Always maintain proper adjustment of blade tension, tracking, and guides.

9. Always ensure workpiece is securely clamped in vise while cutting.

10. Only run saw with wheel covers closed and all guards in place.

11. Do not wear loose clothing, gloves, jewelry, or other items that can get

entangled in moving parts. Tie back long hair and roll up long sleeves.

12. Do not operate when tired or under influence of drugs or alcohol.

13. Do not expose to rain or use in wet locations.

14. Prevent unauthorized use by children or untrained users; restrict access or

disable machine when unattended.

DISCONNECT
POWER BEFORE
ADJUSTMENTS,
MAINTENANCE, OR
SERVICE.

EYE INJURY

HAZARD!

Always wear safety
glasses when using
this machine.

READ and UNDERSTAND
instruction manual to
avoid serious injury. If a
manual is not available,
DO NOT use machine. Go
to www.grizzly.com or
call (800) 523-4777.

WARNING!

Fluid Capacity

Coolant Tank

6.5 gal. Specific to Operation and Material

Component

Type

Capacity

Hydraulic Tank

4 gal.

ISO 46 Hydraulic Oil or SAE 20 Equivalent

601

On feed

motor.

On hydraulic

motor.

On coolant

pump.

602

603

604

605

606

On main

motor.

602

607

608

609

610

612

613

611

Labels & Cosmetics

REF PART #

DESCRIPTION

REF PART #

DESCRIPTION

601

P0886601

SAFETY GLASSES LABEL

608

P0886608

GRIZZLY NAMEPLATE-LARGE

602

P0886602

ELECTRICITY LABEL

609

P0886609

GRIZZLY.COM LABEL

603

P0886603

MODEL NUMBER LABEL

610

P0886610

ELECTRICITY LABEL-LARGE

604

P0886604

READ MANUAL LABEL

611

P0886611

BANDSAW BLADE LABEL

605

P0886605

MACHINE ID LABEL

612

P0886612

TOUCH-UP PAINT, GRIZZLY GREEN

606

P0886606

DISCONNECT 220V LABEL

613

P0886613

TOUCH-UP PAINT, GRIZZLY PUTTY

607

P0886607

FLUID CAPACITY LABEL

Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes

off or becomes unreadable, the owner of this machine MUST replace it in the original location

before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.

Содержание G0886

















































































Результаты поиска

Содержание G0886

Отзывы:

Бренды по названию

Популярные бренды

Grizzly G0886, Руководство пользователя

Результаты поиска

Содержание G0886

Отзывы:

Бренды по названию

Популярные бренды