Grizzly G0852 страница 32 Скачать руководство пользователя | Manualshive

Страница: 32 / 52

background image

-30-

Model G0852 (Mfd. Since 12/18)

System Grounding

Since plastic hose is abundant, relatively inexpen-
sive, easily assembled and air tight, it is a very
popular material for conveying dust from wood-
working machines to the dust collector.

We  recommend  only  using  short  lengths  of  flex-
ible hose (flex-hose) to connect the woodworking
machine  to  the  dust  collector.  However,  plastic
flex-hose  and  plastic  duct  are  an  insulator,  and
dust  particles  moving  against  the  walls  of  the
plastic duct create a static electrical buildup. This
charge will build until it discharges to a ground.

If a grounding medium is not available to prevent
static electrical buildup, the electrical charge will
arc to the nearest grounded source. This electri-
cal discharge may cause an explosion and subse-
quent fire inside the system.

To  protect  against  static  electrical  buildup  inside
a non-conducting duct, a bare copper wire should
be  placed  inside  the  duct  along  its  length  and
grounded  to  the  dust  collector.  You  must  also
confirm  that  the  dust  collector  is  continuously
grounded through the electrical circuit to the elec-
tric service panel.

If you connect the dust collector to more than one
machine  by  way  of  a  non-conducting  branching
duct system and blast gates, the system must still
be  grounded  as  mentioned  above.  We  recom-
mend inserting a continuous bare copper ground
wire  inside  the  entire  duct  system  and  attaching
the wire to each grounded woodworking machine
and dust collector.

Be sure that you extend the bare copper wire down
all branches of the system. Do not forget to con-
nect the wires to each other with wire nuts when
two branches meet at a “Y” or “T” connection.

Ensure that the entire system is grounded. If using
plastic  blast  gates  to  direct  air  flow,  the  ground-
ing  wire  must  be  jumped  (see  the  figure  below)
around  the  blast  gate  without  interruption  to  the
grounding system.

We  also  recommend  wrapping  the  outside  of  all
plastic  ducts  with  bare  copper  wire  to  ground
the outside of the system against static electrical
buildup.  Wire  connections  at  Y’s  and  T’s  should
be made with wire nuts.

Attach  the  bare  ground  wire  to  each  stationary
woodworking  machine  and  attach  to  the  dust
collector  frame  with  a  ground  screw  as  shown
in the figure

below. Ensure that each machine is

continuously grounded to the grounding terminal
in your electric service panel.

External

Ground Wire

Internal

Ground Wire

Flex

Hose

Ground

Screw

Figure 49. Flex-hose grounded to machine.

Plastic Blast

Gate

Copper

Ground Wire

Metal Duct

Figure 48. Ground jumper wire when using

plastic blast gates and metal duct.

Always guard against stat-

ic electrical build up by

grounding all dust collec-

tion lines.

«
...
30
31
32
33
34
...
»

Содержание G0852





















































Отзывы:

Нет отзывов

Похожие инструкции для G0852

Бренд: Baileigh Industrial Страницы: 32

Бренд: King Canada Страницы: 9

Бренд: Jet Страницы: 6

Бренд: Jet Страницы: 11

Бренд: Jet Страницы: 14

Бренд: Jet Страницы: 16

Бренд: Baileigh Industrial Страницы: 28

Бренд: MICRO-AIR Страницы: 6

Бренд: Enke Страницы: 20

PowerCore CPV-1

Бренд: Donaldson Torit Страницы: 32

Бренд: Donaldson Страницы: 20

PowerCore CPV-6F

Бренд: Donaldson Страницы: 34

Torit DCE WSO Flex

Бренд: Donaldson Страницы: 40

Бренд: Donaldson Страницы: 41

Torit RF Series

Бренд: Donaldson Страницы: 48

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды