COPYRIGHT © JANUARY, 2014 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
(FOR MODELS MANUFACTURED SINCE 12/13) #TS16257 PRINTED IN CHINA
The Model G0760 is the same machine as the Model G0705 except the Model G0760 has an X-axis table
power feed. Except for the differences noted in this insert, all other content in the Model G0705 owner's
manual applies to this machine. Before operating your new machine, you MUST read and understand this
insert and the entire Model G0705 manual to reduce the risk of injury when using this machine.
If you have any further questions about this manual insert or the differences between the Model G0760
and the Model G0705, contact our Technical Support at (570) 546-9663 or email [email protected].
MODEL G0760
8" X 29" MILL/DRILL
w/STAND & POWER FEED
MANUAL INSERT
Power Feed Assembly
248
248-1
248-4
248-5
248-6
248-3
248-2
248-7
401
409
REF PART #
DESCRIPTION
248
P0760248
POWER FEED ASSY ALIGN AS-235
248-1 P0760248-1
MOUNTING BRACKET 2-PC
248-2 P0760248-2
CONTROL HANDLE
248-3 P0760248-3
SPEED CONTROL KNOB
248-4 P0760248-4
ON/OFF SWITCH
248-5 P0760248-5
ZYTEL GEAR ASSEMBLY
248-6 P0760248-6
CAP SCREW M8-1.25 X 20
248-7 P0760248-7
DOWEL PIN 6 X 30
401
P0760401
MACHINE ID LABEL
409
P0760409
MODEL NUMBER LABEL
Attaching Power Feed
For shipping purposes, the power feed assembly
comes unattached from the table.
To attach power feed assembly:
1. DISCONNECT MACHINE FROM POWER!
2. Insert pins shown in Figure 1 into holes on
top of left side of table.
Figure 1. Power feed assembly attached to
table.
Pins
Cap Screws
3. Using a 6mm hex wrench, secure assem-
bly with two M8-1.25 x 20 cap screws (see
Figure 1).
Содержание G0760
Страница 62: ......
