Grizzly G0758, Руководство пользователя

Страница: 31 / 52

Model G0758 (Mfd. Since 2/14)
-29-
table and column Ways
lube type .. Model sB1365 or iso 68 equivalent
lube amount ........................................thin Coat
lubrication Frequency ........... 8 hrs. of operation
regular lubrication will ensure mill/drill performs
at its highest potential.
regularly wipe table and
column ways with recommended lubrication, then
move components back and forth several times to
ensure smooth movements (see
figures 34–36).
z-axis Leadscrews
lube type ..Model t23964 or nlgi#2 equivalent
lube amount ........................................thin Coat
lubrication Frequency ....... 120 hrs. of operation
to lubricate z-axis leadscrew:
1. disConneCt MaChine FroM poWer!
2. lower headstock as far as you can without
contacting spindle to table surface.
3. use mineral spirits and a brush to clean as
much existing grease and debris off of z-axis
leadscrew shown in
figure 37 as possible.
allow leadscrew to dry.
4. using a brush, apply nlgi#2 grease to
exposed leadscrew threads, then move head-
stock through its full range of motion several
times to disperse grease along full length of
leadscrew.
figure 35. y-axis way lubrication points.
y-axis Ways
figure 36. X-axis lubrication points.
X-axis Ways
figure 37.
Z-axis leadscrew lubrication point.
z-axis
leadscrew
figure 34. z-axis way lubrication points.
z-axis Ways
(1 of 2)