Grizzly G0754, Руководство пользователя, Страница: 22 / 48

-20-
Model G0754 (Mfg. Since 1/13)
Headstock
Movement
the headstock moves in the following ways:
• rotates 360° around the column.
• travels up and down the column.
• tilts 90° left and right relative to the table.
Tools Needed Qty
Wrench 22mm ................................................... 1
Wrench 24mm ................................................... 1
Rotating Headstock
1. disConneCt MAChine FroM poWer!
2. Loosen the two hex nuts shown in Figure 11.
Figure 11. hex nuts that lock headstock on
column.
hex nuts
Raising/Lowering Headstock
1. disConneCt MiLL FroM poWer!
2. Loosen the two hex nuts shown in Figure 11.
3. use the z-axis crank shown in Figure 12 to
adjust the headstock height.
4. re-tighten the hex nuts before connecting to
power.
Figure 12. z-axis crank.
z-Axis
Crank
3. Make sure the headstock and cords can
move unobstructed, then manually rotate the
headstock around the column.
4. re-tighten the hex nuts before connecting to
power.