-14-
model g0738 (mfg. since 1/12)
Mounting to ceiling
the model g0738 can be operated from a stable
surface that can support its weight or hung from
the ceiling.
the advantage of operating the air filter mounted
to the ceiling is the air circulation pattern is not
blocked by equipment and obstacles closer to the
floor.
When choosing a location to mount the air filter to
the ceiling, keep in mind the clearance necessary
underneath the machine for foot traffic or other
operations. the mounting chains can be used at
full length, which will bring the bottom of the air
filter to approximately 25
1
⁄
2
" from the ceiling, or
the chains can be doubled-up, which will bring the
unit approximately 19
1
⁄
2
" below the ceiling.
Important:
The ceiling hooks must only be
screwed into solid wood. Otherwise, they may pull
out under load and cause the air filter to fall.
ONLy mount the air filter unit to joists or
table that can hold at least 100 lbs. DO
NOT mount the unit only to sheet rock,
pressboard, paneling, or honeycomb wall
panels with expansion-type fasteners. The
fasteners can tear out and the air filter can
fall. Ignoring this caution can result in injury
or property damage.
To mount the air filter to the ceiling:
1.
replace the four phillips head screws shown
in
Figure 8
with the four provided machine
hooks (see
Figure 9
).
Figure 9.
machine hook installed.
ALWAyS have at least
1
⁄
2
" of the machine
hook threaded into the air filter housing to
ensure that the hooks will securely hold the
air filter.
Figure 8.
remove these phillips head screws.
phillips
head
screws
