manualshive.com logo in svg

Grizzly G0700, Руководство пользователя

Поделиться
Скачать
Grizzly G0700 Скачать руководство пользователя страница 6

-4-

Model G0700 (Mfd. Since 5/14)

Machine Data Sheet

The information contained herein is deemed accurate as of 5/26/2015 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 1 OF 2

Model G0700

MACHINE DATA

SHEET

Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901

MODEL G0700 10" SLIDING TABLE SAW WITH SCORING

BLADE ARBOR

Product Dimensions:

Weight.............................................................................................................................................................. 473 lbs.

Width (side-to-side) x Depth (front-to-back) x Height........................................................................... 71 x 47 x 48 in.

Footprint (Length x Width)............................................................................................................... 27-1/2 x 25-1/2 in.

Space Required for Full Range of Movement (Width x Depth).............................................................. 92-1/2 x 63 in.

Shipping Dimensions:

Type.......................................................................................................................................................... Wood Crate

Content........................................................................................................................................................... Machine

Weight.............................................................................................................................................................. 584 lbs.

Length x Width x Height....................................................................................................................... 42 x 46 x 41 in.

Electrical:

Power Requirement........................................................................................................... 230V, Single-Phase, 60 Hz

Full-Load Current Rating........................................................................................................................................ 19A

Minimum Circuit Size.............................................................................................................................................. 30A

Connection Type....................................................................................................................................... Cord & Plug

Power Cord Included.............................................................................................................................................. Yes

Power Cord Length................................................................................................................................................. 6 ft.

Power Cord Gauge......................................................................................................................................... 12 AWG

Plug Included.......................................................................................................................................................... Yes

Included Plug Type.............................................................................................................................................. L6-30

Switch Type.................................................................................................... Magnetic Switch w/Overload Protection

Motors:

Main

Type................................................................................................................. TEFC Capacitor-Start Induction

Horsepower................................................................................................................................................ 5 HP

Phase............................................................................................................................................ Single-Phase

Amps............................................................................................................................................................ 19A

Speed................................................................................................................................................ 3450 RPM

Power Transfer ............................................................................................................................... V-Belt Drive

Bearings..................................................................................................... Shielded & Permanently Lubricated

Main Specifications:

Operation Information

Main Blade Size......................................................................................................................................... 10 in.

Main Blade Arbor Size.............................................................................................................................. 5/8 in.

Scoring Blade Size................................................................................................................................ 3-1/8 in.

Scoring Blade Arbor Size........................................................................................................................ 22 mm

Maximum Width of Dado...................................................................................................................... 13/16 in.

Main Blade Tilt.................................................................................................................................. 0 – 45 deg.

Main Blade Speed............................................................................................................................. 4000 RPM

Scoring Blade Tilt............................................................................................................................. 0 – 45 deg.

Scoring Blade Speed......................................................................................................................... 8000 RPM

Содержание G0700






















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды