Grizzly G0695, Руководство пользователя

Страница: 24 / 56

-22-
Model G0695 (Mfd. Since 01/17)
7. Wears safety glasses or a face shield.
8. Starts the machine.
9. Adjusts the spindle height.
10. For milling operations, uses the X-axis
handwheel to move the table left-and-right
and uses the Y-axis handwheel to move the
table in-or-out, so the cutter removes material
evenly from the workpiece.
For drilling operations, uses the coarse
downfeed lever or fine downfeed handle to
lower the tooling into the workpiece, then
raises the tooling out of the workpiece.
11. Presses the STOP button to stop the spindle.
To complete a typical operation, the operator
does the following:
1. Loosens the knee lock, and adjusts the
table height to ensure there is sufficient
room to install the tooling in the quill and the
workpiece on the table.
2. Installs correct tooling for the task.
3. Mounts the workpiece securely to the table
using a vise or clamps.
4. Selects the appropriate spindle speed for the
workpiece and tooling.
5. Selects the direction the spindle will turn,
based on the type of cut needed, using the
direction switch.
6. Unlocks the X- and Y-axis table locks, then
secures the Z-axis lock.
SECTION 4: OPERATIONS
Operation Overview
The purpose of this overview is to provide the nov-
ice machine operator with a basic understanding
of how the machine is used during operation, so
the machine controls/components discussed later
in this manual are easier to understand.
Due to the generic nature of this overview, it is
not intended to be an instructional guide. To learn
more about specific operations, read this entire
manual, seek additional training from experienced
machine operators, and do additional research
outside of this manual by reading "how-to" books,
trade magazines, or websites.
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
To reduce risk of eye injury from flying
chips or lung damage from breathing dust,
always wear safety glasses and a respirator
when operating this machine.
If you are not experienced with this type
of machine, WE STRONGLY RECOMMEND
that you seek additional training outside of
this manual. Read books/magazines or get
formal training before beginning any proj-
ects. Regardless of the content in this sec-
tion, Grizzly Industrial will not be held liable
for accidents caused by lack of training.