Grizzly G0648 Скачать руководство пользователя | Manualshive

Страница: 36 / 56

background image

-34-

g0648 Welding Fume Extractor

review the troubleshooting and procedures in this section to fix or adjust your machine if a problem devel-
ops. if you need replacement parts or you are unsure of your repair skills, then feel free to call our technical
Support at (570) 546-9663.

SECTION 7: SERvICE

Troubleshooting

Motor and Electrical

Symptom

possible Cause

possible Solution

Machine will not
start.

1.  Emergency stop switch at fault.
2.  problem with 3-phase power supply.
3.  Wiring at fault.
4.  Circuit breaker/fuse has tripped.

5. relay at fault.

6.  transformer at fault.
7.  Control panel pC board at fault.
8.  Motor at fault.

1.  reset or replace emergency stop switch.
2.  have electrician correct power supply problem.
3.  have repair for wiring problems.
4.  have electrician correct for short, and reset circuit

breaker or replace fuse that has its failure lEd
illuminated.

5. inspect and test relay replace as required.

6.  replace transformer.
7.  replace pC board.
8.  test and replace motor as required.

Vibrating motor
function is
inconsistent or
inoperative.

1. Machine is not connected to power.

2. Capacitor is at fault.
3. Wiring at fault.

4. Circuit fuse has blown.

5.  transformer at fault.
6.  Control panel pC board at fault.
7.  Motor at fault.

1. Connect machine to power so the digital display is

lights, then push and hold clean filter button.

2. replace the capacitor.
3. trace down wiring path and repair for damaged

wiring or loose plugs.

4. repair for short, and replace the fuse that has its

failure lEd illuminated.

5.  replace transformer.
6.  replace control panel pC board.
7.  test and replace motor as required.

rolling filter or
conveyor motor
function is
inconsistent or
inoperative.

1. Machine is not connected to power.

2.  push button switch is at fault.
3.  Capacitor is at fault.
4.  Wiring at fault.

5. Circuit fuse has blown.

6.  Control panel pC board at fault.
7.  transformer at fault.
8.  Motor/motor pC board at fault.

1. Connect machine to power so the digital display is

lights, then push and hold clean filter button.

2.  replace the push button switch for the motor.
3.  replace the capacitor.
4.  trace down wiring path and repair for damaged

wiring or loose plugs.

5. repair for short, and replace the fuse that has its

failure lEd illuminated.

6.  replace control panel pC board.
7.  replace transformer.
8.  replace motor/motor pC board as required.

Filter warning lamp/
buzzer engages but
filter paper has not
run out.

1.  infrared sensor is at fault.
2.  Buzzer lamp is at fault.
3.  Control panel pC board at fault.

1.  replace infrared sensor.
2.  replace buzzer lamp.
3.  replace control panel pC board.

«
...
34
35
36
37
38
...
»

Содержание G0648

























































Отзывы:

Нет отзывов

Похожие инструкции для G0648

Бренд: ABB Страницы: 20

Бренд: Gale Страницы: 16

Бренд: R.V.R. Elettronica Страницы: 38

Бренд: Panasonic Страницы: 104

Бренд: Panasonic Страницы: 32

Бренд: IDS Страницы: 36

Бренд: quadient Страницы: 5

Бренд: quadient Страницы: 212

Бренд: Yamaha Страницы: 7

Бренд: Abus Страницы: 4

Бренд: Tracer Страницы: 12

Бренд: SAF Страницы: 59

SECURITY SYSTEM

Бренд: HAI Страницы: 82

JBL JBLPARTYBOXGOBRU

Бренд: Harman Страницы: 17

Бренд: EAW Страницы: 2

Бренд: Laars Страницы: 9

Бренд: Sennheiser Страницы: 2

Бренд: M+S Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды