Grizzly G0639, Руководство пользователя

Страница: 22 / 32

-20-
Model G0639 22-Ton Hydraulic Log Splitter
Changing
Hydraulic Fluid
Always wear safety gog-
gles when servicing the
hydraulic system.
Figure 24. Draining hydraulic fluid.
Inspect for burnt-smelling or tan-colored water
contaminated hydraulic fluid. If contaminated,
replace tank breather, clean tank filter/strainer,
flush system, and replace fluid.
4
. When the tank is empty, remove the bolts
the rest of the way and then remove the tank
screen.
5
. Pull the tank vent off.
6
. Clean the tank vent with mineral spirits and
let air dry.
7 . Clean the tank screen with mineral spirits and
blow dry with compressed air.
8
. Inspect the screen and tank vent for any
holes and replace if any damage exists.
9 . Reach into the tank and wipe out as much
residual fluid and contaminants as possible.
We highly recommend that the tank be
cleaned out with a pressure washer or steam
cleaner and fully dried with compressed air
for best results.
10
. Reinstall the tank screen, rubber gasket, and
hose.
11 . Fill the tank with 2.5 gallons of hydraulic fluid
and reinstall the tank vent cap.
To change the hydraulic fluid:
1
. Chock the log splitter wheels to prevent it
from rolling.
2 . Place a 3-gallon or larger drain pan under the
tank filter screen cover.
3
. Loosen the screen cover hex bolts and care-
fully dislodge the cover slightly so the hydrau-
lic fluid fills the drain pan (
Figure 24
).
Note:
Do not lose the rubber gaasket in the
drain pan.