model g0631 (mfg. since 3/10)
-11-
inventory
if any nonproprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
NOTICE
Some hardware/fasteners on the inventory
list may arrive pre-installed. check mount-
ing locations before assuming that any
items from the inventory list are missing.
the following is a description of the main compo-
nents shipped with your machine. lay the compo-
nents out to inventory them.
Note:
If you can't find an item on this list, check
the mounting location on the machine or examine
the packaging materials carefully. Occasionally
we pre-install certain components for shipping
purposes.
Box 1: (Figure 3)
Qty
A.
downdraft table (not shown) .................... 1
B.
Center panel ............................................... 1
c.
Filters 16" x 25" x 2" (0.3 micron) .............. 2
D.
Filters 16" x 25" x 1" (1 micron) ................. 2
E.
downdraft plates ...................................... 10
F.
Center downdraft plate .............................. 1
G.
right panel ................................................. 1
h.
left panel ................................................... 1
i.
hardware (not shown)
—Foot pad screws
3
/
8
"-16 x 2"
(Cabinet Base ......................................... 6
—hex nuts
3
/
8
-16 x 2" (Cabinet Base) ....... 6
—pins (panels) .......................................... 8
—handles (outlet plates) .......................... 2
—phillips head screws
1
⁄
4
"-20 x
5
⁄
8
"
(outlet plates) ......................................... 4
B
C
d
E
F
g
h
Figure 3.
model g0631 inventory.
SuFFOcATiON hAzARD!
immediately discard all plas-
tic bags and packing materi-
als to eliminate choking/suf-
focation hazards for children
and animals.
