manualshive.com logo in svg

Grizzly G0568, Руководство пользователя

Владелец Руководство для Grizzly G0568 доступно для бесплатного скачивания на manualshive.com. Получите доступ к полной версии руководства, обеспечивающего правильную эксплуатацию и обслуживание вашего оборудования. Скачайте его сейчас и узнайте все возможности этого продукта.

Поделиться
Скачать
background image

Model G0568/G0569 (Mfd. Since 10/11)

-7-

The information contained herein is deemed accurate as of 6/19/2018 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 1 OF 3

Model G0568

MACHINE DATA

SHEET

Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901

MODEL G0568 24" INDUSTRIAL BANDSAW 5 HP SINGLE‐

PHASE

Product Dimensions:

Weight.............................................................................................................................................................. 836 lbs.

Width (side-to-side) x Depth (front-to-back) x Height..................................................................... 48 x 32 x 83-1/2 in.

Footprint (Length x Width)............................................................................................................... 41-3/8 x 23-1/2 in.

Shipping Dimensions:

Type................................................................................................................................................... Wood Slat Crate

Content........................................................................................................................................................... Machine

Weight.............................................................................................................................................................. 951 lbs.

Length x Width x Height....................................................................................................................... 27 x 45 x 87 in.

Must Ship Upright................................................................................................................................................... Yes

Electrical:

Power Requirement........................................................................................................... 220V, Single-Phase, 60 Hz

Full-Load Current Rating........................................................................................................................................ 23A

Minimum Circuit Size.............................................................................................................................................. 30A

Power Cord Included.............................................................................................................................................. Yes

Power Cord Length.............................................................................................................................................. 80 in.

Power Cord Gauge......................................................................................................................................... 12 AWG

Plug Included.......................................................................................................................................................... Yes

Included Plug Type.............................................................................................................................................. L6-30

Switch Type.................................................................... Control Panel w/Magnetic Switch Protection & Lockout Key

Motors:

Main

Horsepower................................................................................................................................................ 5 HP

Phase............................................................................................................................................ Single-Phase

Amps............................................................................................................................................................ 23A

Speed................................................................................................................................................ 1720 RPM

Type................................................................................................................. TEFC Capacitor-Start Induction

Power Transfer ............................................................................................................................... V-Belt Drive

Bearings..................................................................................................... Shielded & Permanently Lubricated

Main Specifications:

Main Specifications

Bandsaw Size............................................................................................................................................ 24 in.

Max Cutting Width (Left of Blade)........................................................................................................ 24-1/2 in.

Max Cutting Width (Left of Blade) w/Fence......................................................................................... 23-1/4 in.

Max Cutting Height (Resaw Height).................................................................................................... 16-1/4 in.

Blade Speeds..................................................................................................................................... 5300 FPM

Содержание G0568

















































































Отзывы:

Нет отзывов

Похожие инструкции для G0568

Eastwood 20237 Instructions Manual preview
20237
Бренд: Eastwood Страницы: 8
Oliver 4035 Owner'S Manual preview
4035
Бренд: Oliver Страницы: 24
Truper SICI-7-1/4A3 11004 Manual preview
SICI-7-1/4A3 11004
Бренд: Truper Страницы: 24
Milwaukee 6180-20 Operator'S Manual preview
6180-20
Бренд: Milwaukee Страницы: 24
Princess auto 8130239 Owner'S Manual preview
8130239
Бренд: Princess auto Страницы: 9
Parkside 331932_1907 Operating And Safety Instructions Manual preview
331932_1907
Бренд: Parkside Страницы: 100
Nitto Kohki SSW-110 Instruction Manual preview
SSW-110
Бренд: Nitto Kohki Страницы: 8
Hitachi C 8FSC Handling Instructions Manual preview
C 8FSC
Бренд: Hitachi Страницы: 32
Parkside 339390 1910 Operating And Safety Instructions Manual preview
339390 1910
Бренд: Parkside Страницы: 92
Berner 340656 Original Instructions Manual preview
340656
Бренд: Berner Страницы: 132
Ferm FZT-250 User Manual preview
FZT-250
Бренд: Ferm Страницы: 6
Ferm FKZ-250 User Manual preview
FKZ-250
Бренд: Ferm Страницы: 6
Ferm FKZ-205 User Manual preview
FKZ-205
Бренд: Ferm Страницы: 4
Ferm FRS-600D User Manual preview
FRS-600D
Бренд: Ferm Страницы: 36
Ferm FES-350 User Manual preview
FES-350
Бренд: Ferm Страницы: 56
Ferm CSM1041P Original Instructions Manual preview
CSM1041P
Бренд: Ferm Страницы: 72
Scheppach 5901403903 Translation Of Original Instruction Manual preview
5901403903
Бренд: Scheppach Страницы: 232
Stanley RS25 User Manual preview
RS25
Бренд: Stanley Страницы: 20

Бренды по названию

Популярные бренды

Загрузить еще бренды