-4-
G0530 Variable Speed Buffer
Unfamiliarity with this manual could result
in serious personal injury. Read and
become familiar with the contents of this
manual, including all the safety warnings.
No list of safety guidelines can be com-
plete. Operating this machinery may
require additional safety precautions spe-
cific to your shop environment. Failure to
use reasonable caution while operating
this machine could result in serious per-
sonal injury.
10.
NEVER LEAVE THE BUFFER RUN-
NING UNATTENDED.
11.
NEVER ATTEMPT TO BUFF SMALL
PARTS.
If you cannot hold small parts
securely, do not buff them with this
machine. Secure them with clamps or
similar jigs or use a smaller buffer.
12.
BUFFING CAN PRODUCE LARGE
AMOUNTS OF DUST.
Be sure to wear
the appropriate respirator to prevent
breathing harmful particles. Follow the
respirator instructions for use.
13.
BE AWARE OF MAXIMUM SPEEDS
FOR THE BUFFING WHEELS.
Never
exceed the maximum speed listed on
each buffing/polishing wheel.
14.
ALWAYS REMOVE THE WORKPIECE
from the buffing wheel before you adjust
the RPM while buffing.
15.
NEVER BUFF
a workpiece with protrud-
ing nails, loose knots, large splinters,
and any other condition that may cause
the buffing wheel to grab and project the
workpiece or object.
Additional Safety Instructions for Buffers
1.
ALWAYS WEAR
a face shield.
2.
SECURE THIS BUFFER
firmly to the floor or
a stand.
3.
NEVER INSTALL A GRINDING WHEEL ON
THIS BUFFER.
It is strictly designed for buff-
ing and polishing only.
4.
DO NOT STAND DIRECTLY IN FRONT OF
THE
buffer wheel when turning the machine
ON
, or when buffing.
5.
DO NOT JAM WORK AGAINST THE BUFF-
ING WHEEL.
Slowly ease the work into the
buffing wheel.
6.
ALLOW THE WHEEL TO REACH FULL
SPEED
before introducing the workpiece.
7.
DO NOT ALLOW YOUR HANDS TO COME
INTO CONTACT WITH THE BUFFING
WHEEL.
Abrasive accessories are designed
to remove material that is harder than your
skin very quickly.
8.
NEVER PERFORM ANY ADJUSTMENT
OR MAINTENANCE PROCEDURE
while
the buffer is connected to power.
9.
NEVER BUFF MATERIAL FROM THE
REAR OF THE MACHINE
.
Содержание G0530
Страница 18: ...16 G0530 Variable Speed Buffer...