Grizzly G0479, Руководство пользователя

Страница: 28 / 36

22 G0578 40" Pan and Box Brake
There are four main areas to keep lubricated on
the Model G0578 Pan and Box Brake: 1) The
unpainted cast iron surfaces, 2) the bending leaf
hinge, 3) clamping leaf grease fittings, and 4) the
setback knob threads.
Cast Iron Surfaces
To prevent rust, all unpainted cast iron surfaces
on the Model G0578 should be regularly main-
tained with a surface protectant like G96
®
GUN
TREATMENT (Model H3788) or BOESHIELD ®
T-9 (Model G2871).
Note— Check with the current Grizzly catalog for
current pricing and a variety of other quality metal
protectants.
Clamping Leaf
There are two grease fittings for the clamping
leaf (see
Figure 21 ). They should be greased at
least once a week. Grease daily if your machine
is under heavy, continuous use.
Figure 21. Grease fittings (only one side
shown).
Grease Fitting
Figure 23.
Location to lubricate setback threads.
Lubrication
Bending Leaf
Place an occasional dab of white lithium grease
on the bending leaf hinge (
Figure 22 ).
SECTION 4: MAINTENANCE
Setback Knob Threads
The threads on the setback knobs (see Figure
23
) may need an occasional dab of white lithium
grease. The threads are easiest to reach if the
setback is moved all the way forward or all the
way backward. For best results, move the setback
all the way back and forth one time after apply-
ing the grease; grease the threads as needed to
maintain smooth operation from the knobs.
Figure 22.
Location to lubricate hinge.